Enquire Now

Complete your details below and we will be in touch as soon as possible.


Brand Info

View Cannon website

Cannon Semi-Automatic Cold-Cranking Simulator, 230V

Part Number: 9728-E43Product Details


CANNON Thermoelectrically-Cooled Cold-Cranking Simulators measure the apparent viscosity of oils at temperatures from -35°C to -5°C within a viscosity range of 1500 mPa·s to 27000 mPa·s. The CCS-2050 speeds up a traditionally labor-intensive test procedure by computer control of instrument calibration, rotor speed sensing, test cycles, data calculation, and report generation. However, unlike the fully-automatic CCS-2100, the CCS-2050 requires that an operator be present to load each sample individually. Improved temperature management of the rotor/stator eliminates the need for grouping the samples by temperature of analysis, as was necessary in older CCS models. In addition, a thermoelectric sample warming cycle greatly improves the sample flushing process. A new type of sample holder eliminates the risk of spillage found in older models of the semi-automatic CCS. The CCS-2050 meets all the requirements of ASTM D 5293 and SAE J300.

The CCS-2050 consists of a patented thermoelectrically-cooled rotor/stator and an integral CCS Series II Controller. The rotor/stator cell is attached to a vacuum system and a metering constant-displacement injection pump. The rotor/stator cell is cleaned by purging the previously measured sample with a portion of new sample prior to measuring its viscosity. Purged sample is drawn into a waste receiver by the vacuum system. Rotor speed is measured by a high resolution digital encoder. A proprietary software program then converts this data to sample viscosity. Viscosity calculations are based on test data and rotor/stator calibration information stored by the software. User interface options include an instrument calibration routine, configuration of test cycles, and multiple means of processing test data including save, print, and export via the RS-232 serial port for LIMS capture.

• Cooled by Built-in Solid-State Thermoelectric Modules
• Improved Precision Over Earlier Models
• Powerful VISCPRO® for Windows® Software
• Semi-Automatic Operation (after sample is loaded no further operator interaction required)
• Extended Range – 1500 to 27000 mPa·s (cP)
• Needs No Solvent Cleaning


Part Number: 9728-E43
Compliance CE Mark: EMC directive(89/336/EEC); Low voltage directive (73/23/EEC); HI-POT (1900 VDC, 60 sec.)
Computer Computer not included. Please contact CANNON for specifications
Dimensions 216mm × 267mm × 305mm (8.5" × 10.5" × 12")
Dimensions 711mm × 333mm × 645mm (28" × 13.125" × 25.375")
Add at least 100mm (4") to depth for installation
Electrical 115 volts AC ±10%, 60 Hz, 1000W
Operating Conditions 15-30°C, 10%-90% RH non-condensing, Installation Category II, Pollution degree 2
Shipping Weight Approximately 120.5kg (265 lbs.)
Weight 8.2kg (18 lbs.)
Weight 40kg (88lbs.)

Related Items

  • PolyVISC Automatic Viscosity Measuring System, 230V, 50/60 Hz, 1850 Watts
  • Cannon HTHS Series II-F High-Temperature High-Shear Viscometer, 230V, 50/60 Hz, 500 watts
  • VISDISK for Windows, Version II
  • Glass CAV Sample Vial, 62mm × 24mm × 1.45mm, glass
  • CAV-2200 Dual Bath Automatic Viscometer, 230V
  • miniAV®-X Automatic Viscometer, with 10 place auto sampler, 230V, 50/60 Hz
  • miniQV-X Quick Automatic Viscometer, with 25 place auto sampler, 230V, 50/60 Hz, 500 watts
  • miniPV Polymer Solution Automatic Viscometer, 230V, 50/60 Hz
  • miniAV®-LT® Low Temperature Automatic Viscometer, 230V, 50/60 Hz
  • miniPV-HX Fully Automated Polymer Solution Viscometer, with 10-place auto-sampler, 230V, 50/60 Hz
  • Cannon PulpVIS, 100-230V, 50/60 Hz
  • CMRV-5000F Mini-Rotary Viscometer, 230V, 50/60 Hz
  • Silicone Bath Oil, 10 cSt for MiniAV, 1000ml
  • PolyVISC® SPS Solution Preparation System, 230V, 50/60 Hz
  • CAV® 4.2 Dual-Bath Kinematic Viscometer, 230 Vac, 50/60 Hz, 1200 watts
  • Includes two viscometer tubes, set of oil viscosity standards, case of glass vials, high precision digital thermometer with probe, VISCPRO® data storage/management software and professional installation
  • CMRV-4500F Mini-Rotary Viscometer, 230V, 50 Hz
  • CCS-2100 Fully-Automatic Cold-Cranking Simulator, 230V
  • CAV-2100 Single Bath Automatic Viscometer, 230V
  • miniAV® Automatic Viscometer, 230V, 50/60 Hz
  • TVB 445 Thermostatic Bath for Viscosity Testing, 230V, 50/60 Hz
  • VH1 Automated Viscometer, Houillon Method, Single Solvent, 230V
  • VH2 Automated Viscometer, Houillon Method, Dual Solvents